About option diagrams
In addition to the design of each wedding ring,
Diamond engraving options are available to further enhance originality.
By adding your own personal touch to the ring you have chosen, it will become a personal wedding ring that will be a memory just for the two of you.
MONAKA jewellery offers three types of carved settings for diamonds: "Hidden", "Four-light setting" and "Eight-light setting". Accurate setting requires the skills of a skilled craftsman, and each setting is carefully carved by hand by a craftsman.
- Covered -
A small hole is drilled into the metal part of the ring, and instead of having prongs to hold the diamond in place, it is set face down into the metal.
Unlike the general method of setting with prongs, this setting has less protrusions on the surface of the ring and is less likely to get caught on anything. It has a clean look and allows you to casually and simply enjoy the brilliance of the diamond.
- Four-light clasp -
This is a carving setting method that uses a chisel, the tip of which can be used to carve like a carving knife, to carve around the stone, causing the raised metal to act as claws in place.
The four-light clasp, which gives the appearance of light shining through, is also incorporated into the design of en-MD/en-LD.
The design is established as a focal point, and the four surrounding claws subtly sparkle.
- Eight-point clasp -
The clasp is the same as the four-light clasp, but it is a clasp that creates a more elegant look and is also known as a halo clasp.
Hachiko fastening The design looks as if light is shining through it, making the diamond appear more striking.
The eight-light clasp is only available in kumo. It is possible to engrave it.
- Diamond engraving option -
Diamonds can be engraved into the inside or outside of the wedding ring.
Please note that the designs and types that we cannot accommodate are limited depending on the design.
〈en〉
💎M: Only the front and back are covered
💎L: One diamond, set with four lights on both sides: ¥6,600 (tax included) / diameter approx. 1.4mm, 0.01ct
〈en-MD,en-LD〉
Due to design, options cannot be added.
<Kasane>
💎S: Only lining on both sides💎M: Lining on both sides and four-light fastening💎L: Lining on both sides and four-light fastening
1 diamond: ¥6,600 (tax included) / diameter approx. 1.4mm, 0.01ct
<kasane-MD>
Due to design, options cannot be added.
< kumo〉
💎S/M/L: Surface is embossed・Four-light clasp・Eight-light clasp
1 diamond: Front side ¥7,700 (tax included) / Diameter approx. 1.8mm, 0.03ct
💎 S/M/L: Back side is sewn・Four-light fastening
1 diamond: back side 6,600 (tax included) / Diameter approx. 1.4mm, 0.01ct
<tatae>
💎S: Due to design, options cannot be added.
💎M/L: Surface is embossed・Four-light fastening
1 diamond: back side 6,600 (tax included) / Diameter approx. 1.4mm, 0.01ct
💎M/L: Only four-light clasp on the back
1 diamond: back side 6,600 (tax included) / Diameter approx. 1.4mm, 0.01ct
< Shino〉
💎S/M/L: 1 diamond set with four light settings on both the front and back: ¥6,600 (tax included) / diameter approx. 1.4mm, 0.01ct
In your daily life, there may be some men who cannot wear sparkly accessories or feel uncomfortable wearing things with diamonds on the surface. In that case, why not try hiding the sparkle of diamonds on the inside?
The L/4.5mm width of tatae is
You can also place two diamonds vertically as shown in the image.
Sometimes you can wear the diamond side, and sometimes you can wear it on the back of your finger to highlight the presence of gold. By adding diamonds to a fashionable wide ring, you can enjoy a feminine and glamorous side, and the design is full of originality.
The type of engraving used will vary depending on the design, but if you have any requests or questions, please feel free to contact us via Contact .
